Partner
← All resources

Interactive tools · STABICON LIFE SCIENCES

Formulation Batch Calculator

Scale an agreed formula with explicit assay basis, moisture correction and yield.

Mass balance + ingredient CSV

UNDERSTAND BEFORE YOU USE

A little context. A better decision.

Learn → try → review
  1. 01

    Specify batch size and pure-equivalent targets.

  2. 02

    Confirm whether each assay is as-is or dry basis before applying moisture correction.

  3. 03

    Review corrected ingredient weights and q.s. balance; yield describes expected recovery.

Illustrative formulation only. Scale an agreed formula; this tool does not recommend ingredients, doses or permitted overages. Yield affects the projected recovery, not the weighed batch.

Ingredient 1

Ingredient 2

Corrected ingredients0.72502685 kg
Balance / q.s.9.2749731 kg
Projected recovery9.5 kg
Draft corrected mass balance — no automatic process overage
IngredientTarget equivalent (%)Assay basisEffective fractionTarget (kg)Corrected weight (kg)
Example ingredient A5as-is0.980.50.51020408
Example ingredient B2dry0.9310.20.21482277
Balance / q.s.To theoretical batchAs agreed9.2749731

Review opens an editable Client enquiry draft. Nothing is submitted until you send it. Drafts expire after 30 minutes in this tab.

Read the text output
STABICON · FORMULATION BATCH CALCULATOR
Planning output — confirm assumptions and requirements with the laboratory.

Theoretical batch: 10 kg
Expected yield: 95% = 9.5 kg; planned loss 0.5 kg
Corrected mass = target mass / effective fraction. As-is: assay/100. Dry basis: assay/100 × (1 − moisture/100).
Example ingredient A: target 5%; assay 98% (as-is); moisture not applied; weigh 0.51020408 kg
Example ingredient B: target 2%; assay 95% (dry); moisture 2%; weigh 0.21482277 kg
Balance / q.s. to theoretical batch: 9.2749731 kg
Target percentages are pure-equivalent fractions for this calculation. Moisture is applied only to a dry-basis assay; no extra process overage is added. The balance material and any correction must be approved for the actual formula.

This output is not a protocol approval, test report, batch-release decision or filing acceptance.
https://stabicon.com/resources/formulation-batch-calculator

Inputs are not automatically sent or saved by these tools. Download your output before leaving. Technical and market-specific decisions require review.

Stabicon Life Sciences

Science-Led Formulations. Scalable Health Platforms.

Offices

Corporate Office

22, 7th Cross, Jaibharath Nagar, Bengaluru 560 033, Karnataka, India

Research & Development

28, Bommasandra Industrial Area, 4th Phase, Jigani Hobli, Anekal Taluk, Bengaluru 560 099, Karnataka, India

Newsletter

Quarterly briefings on platforms, science & partnerships.

No spam. Request a consent withdrawal at bd@stabicon.com.

Press Kit

Logos, company information & spokesperson details – available from our media team.

Request Press Kit

For media queries: press@stabicon.com

Accreditations

ISO/IEC 17025:2017 (NABL)WHO Geneva – Audited & ApprovedFSSAI ApprovedCDSCO IndiaUS FDA – Registered FacilityDSIR RegisteredAYUSH Registered

Disclaimer: The information provided on this website is for educational and informational purposes only and does not constitute medical advice, diagnosis, or treatment. Always seek the advice of your physician or other qualified healthcare provider with any questions you may have regarding a medical condition. These statements have not been evaluated by the Food and Drug Administration (FDA). This product is not intended to diagnose, treat, cure, or prevent any disease. Product packaging and materials may vary from those shown on our website. We recommend that you do not rely solely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.

© 2026 Stabicon Life Sciences Pvt. Ltd. All rights reserved.

Science-Led Formulations. Scalable Health Platforms.

Admin