Guides · STABICON LIFE SCIENCES
Laboratory Report Reading Library
Explore annotated illustrative COAs, stability tables and microbiology results.
Annotated examples + result comparisonREAD A RESULT IN CONTEXT
See what each part of a report tells you.
Choose a teaching report, open its reading points, then try a numerical comparison with explicit units and reporting basis.
Illustrative certificate of analysis
| Test | Fictional specification | Fictional result | How to read |
|---|---|---|---|
| Identity | Matches agreed reference | Matches | Check method and reference identity. |
| Assay | 95.0–105.0 % | 98.5 % | Compare the same units and reporting basis. |
| Water | ≤ 2.0 % | 1.2 % | Confirm the method and criterion apply to this sample. |
Fictional limits and results. These are not recommended specifications or evidence for batch release.
Start with identity
Check sample ID, batch, product and report reference before the result table.
What to check nextWithout these, you cannot establish which sample the result describes.
Compare a number with entered limits.
Use a criterion applicable to your sample and method. No limits are supplied for your product.
Enter result.
Plain-language glossary
Result: The reported observation or value, read with units and reporting basis.
Specification: The agreed requirements used for a particular material or product.
Method: The identified analytical procedure and relevant version or reference.
LOD / LOQ: LOD concerns detection; LOQ concerns quantitation with suitable performance. Read the method and stated limits.
ND: Not detected under the stated method and test conditions; read the reporting limit.
OOS: A result outside an established specification or acceptance criterion; investigation and review are needed.
OOT: A potentially unexpected trend relative to the established data context; assessment is needed.
CFU: Colony-forming units: a microbiological count expression, read with its mass or volume basis.
Technical background: FDA OOS investigation guidance ↗
Review opens an editable Client enquiry draft. Nothing is submitted until you send it. Drafts expire after 30 minutes in this tab.
Read the text output
STABICON · LABORATORY REPORT READING LIBRARY Planning output — confirm assumptions and requirements with the laboratory. REPORT-READING WORKSHEET Teaching report: Illustrative certificate of analysis — all shown report data and criteria are fictional Start with identity · Check sample ID, batch, product and report reference before the result table. · Without these, you cannot establish which sample the result describes. Read assay with its basis · 98.5% is within the fictional 95–105% interval only on the same units and reporting basis. · Ask for method reference and whether the result is as-is, dry or another basis. Read the water result · 1.2% is below the fictional maximum 2.0%. · The example criterion is not a recommendation for your product. COMPARISON: VISITOR-ENTERED VALUES Result: Not entered ; basis: Not stated Entered criterion: interval; lower Not used / not entered; upper Not used / not entered ; basis Not stated Arithmetic comparison: Enter result. Question for Stabicon: To discuss A comparison with entered bounds is not a release decision, validation of the criterion or an investigation conclusion. This output is not a protocol approval, test report, batch-release decision or filing acceptance. https://stabicon.com/resources/laboratory-report-library
Inputs are not automatically sent or saved by these tools. Download your output before leaving. Technical and market-specific decisions require review.