Interactive tools · STABICON LIFE SCIENCES
Sample Quantity Calculator
Build a transparent sample estimate from lab-confirmed consumption and a full study matrix.
Quantity breakdown + CSVUNDERSTAND BEFORE YOU USE
A little context. A better decision.
- 01
Obtain consumption per analysis from the laboratory, including preparation losses.
- 02
Count analyses, pulls and every independently stored group.
- 03
Add an explicit repeat allowance and retain quantity; confirm the resulting unit.
An example replaces the relevant inputs; it is not a recommended protocol.
Scheduled consumption + repeats + additional retention. Confirm pack rounding and any shared initial samples separately.
Review opens an editable Client enquiry draft. Nothing is submitted until you send it. Drafts expire after 30 minutes in this tab.
Read the text output
STABICON · SAMPLE QUANTITY CALCULATOR Planning output — confirm assumptions and requirements with the laboratory. Unit: capsules Consumption per analysis: 10 Analyses per pull: 3; pulls per group: 5 Batches × conditions × packs: 3 × 2 × 1 = 6 Base = consumption × analyses × pulls × groups = 900 capsules Repeat allowance 10% of base = 90 capsules Retention 20 per group = 120 capsules Total estimate: 1,110 capsules Unrounded total: 1,110 capsules Consumption and retention use whole count units; repeat allowance rounds up at the final total. Full crossed matrix; no automatic sharing, pooling or reduced designs. This output is not a protocol approval, test report, batch-release decision or filing acceptance. https://stabicon.com/resources/sample-quantity-calculator
Inputs are not automatically sent or saved by these tools. Download your output before leaving. Technical and market-specific decisions require review.